Foosball.com Forums

Chat Area => General Chat => Topic started by: dtheman22222 on August 04, 2023, 10:13:23 AM

Title: T3000 Surface Question
Post by: dtheman22222 on August 04, 2023, 10:13:23 AM

Hi. I am considering purchasing a T-3000 where I can't personally inspect beforehand.  I was wondering if anyone has an opinion on this play surface.  I see lines about a quarter inch into the surface on left and right sides and am curious if this could be warping or damage or is just standard? 

https://flic.kr/ps/42J8Gz (https://flic.kr/ps/42J8Gz)

Any insight or opinions are appreciated. 

Title: Re: T3000 Surface Question
Post by: ShopTeacher on August 04, 2023, 10:38:48 PM

Perfectly normal - those lines are the side strips to keep the ball off the wall. See image here: https://foosgear.com/products/playfield-side-strip-2pc

Title: Re: T3000 Surface Question
Post by: Tim on August 25, 2023, 03:58:32 PM

Looks good to me.

I'd check for play surface warping as well.

Here's some help on table ID:
https://timzfooz.com/tech/Tornado-ID.html