Foosball.com Forums

Question about Storm II

0 Members and 1 Guest are viewing this topic.

Question about Storm II
« on: January 05, 2014, 11:59:34 AM »
Hello I picked up a storm II table last night - It was only played a few times and looks like new. The rods don't spin well and seem stiff. Im not sure they were ever lubed. When looking at it if you pull a handle all the way out the rod on the other side rests about half way into the outside bering. I remember when you pulled a rod all the way out there was still a small bit of the metal end still sticking out of the other side of the table. could some one clarify this for me?  Thank You

Offline alaskan thunder

  • *
  • 571
  • https://www.facebook.com/groups/firstcoastfoosball
Re: Question about Storm II
« Reply #1 on: January 05, 2014, 12:02:57 PM »
The rod will always be inside the bearing when pulled dead on the wall.

Re: Question about Storm II
« Reply #2 on: January 05, 2014, 12:19:32 PM »
Thanks so much for the quick answer

Re: Question about Storm II
« Reply #3 on: January 05, 2014, 04:03:41 PM »
The table only had 15 plays on it when I bought it, everything including the handles looked brand new. The bars just don't spin like others I have played is there a break in period for these?