Alright here we go, i did it. It was a complete pain in the ass though. The rods had some rust on the ends and i tried my best to remove it. But anyways as i was putting the guys on they stuck on this rust and wouldn't move like at all.
With another person it took as around 2-3 hours i want to say just to put the dudes on. While we where putting the men on, we noticed due to the quality control of the rods, some of the rods would be slightly bigger towards one end some of the men had some of their innards shaved off.
Lining up was a nightmare as well, it was hard to aim for the man hole and rod hole.
It plays pretty good now though, the ball is pretty grippy so we lose control it sometimes ends up in dead spots. Also there is slight indentation in the table and if the ball hits those it kinda wanders off sometimes.
I would say it was worth it though for the 120 i spent. Better then the more expensive wal mart tables imo.
Here some pictures of the final product:
The Table
![](http://i.gyazo.com/890c1d4dede0ce6baec7f2767ab046de.jpg)
So close from hitting the goalie.
![](http://i.gyazo.com/f56db64326b481924580828c6ed5a512.jpg)
And with the Dynamo ball
![](http://i.gyazo.com/e2b7a684559bb6f20dce03cf3caf5d0f.jpg)