Topic: levelling table

[Foosey]

I'm new to foosball and just got a Warrior table. Maybe I'm being anal, but I can't get it perfectly level as determined by placing a two foot level at various places on the field. Its not off by much, but i think i can tell when, for example, practicing tic tacs. When leveling i get to a point where improving one side of the table worsens the other side. Is this normal, and just a "characreristic" of the table?

[kgstewar]

I've never owned a Warrior, but I'm sure you should be able to get it level. I own a Tornado and Bonzini and use the following technique to level the tables.

1. Screw the leveling feet all the way in to start.
2. Put your level on the playing surface about 5" in front of one goal, with the level oriented parallel to the rods. Using the two nearest feet, get the bubble in the middle. (actually you only need to adjust one foot).
3. Repeat for the goal on the other end.
4. Now put your level in the middle of the play field oriented perpendicular to the rods. Raise the low end by screwing BOTH feet out exactly the same amount.

Table should now be level side to side and end to end.

[Foosey]

Thanks for the reply, certainly makes sense.

[kgstewar]

No problem, let us know if it works.

[Foosey]

Using your technique definitely helped as did snugging up all the bolts.  Eveything looks pretty level now and feels right. Thanks again