Foosball.com Forums

Curved playing field on vintage (maybe tournament soccer table)

0 Members and 2 Guests are viewing this topic.

Curved playing field on vintage (maybe tournament soccer table)
« on: October 21, 2022, 08:56:25 AM »
I was given this vintage (1970's) table by my neighbor.  After cleaning it up it looks and works great, but I noticed that no matter where you put the ball on the table it wants to roll in towards the center.  I am wondering if the field is supposed to be curved or if it has just sagged over the years.  If I apply some pressure on the bottom of the table in the center, it seems to flatten it out pretty well.  Wondering if this is something i can/should fix, or if this is the way it was designed and we should just play it as is. 
I can't figure out how to attach a photo to this post, but the table I have is the same exact one that is shown in this post https://www.foosball.com/forum/index.php?topic=4789.0
https://www.foosball.com/forum/index.php?topic=4789.0
Thanks!
Laszlo

Re: Curved playing field on vintage (maybe tournament soccer table)
« Reply #1 on: October 22, 2022, 06:12:24 PM »
It should be flat. I had that problem with a million dollar table a few years ago that I got for cheap. I fixed it by installing a couple 2x4 ribs under the playfield. I pushed the playfield back up from underneath and attached the ribs to the sidewalls with 90 degree angle brackets.

Re: Curved playing field on vintage (maybe tournament soccer table)
« Reply #2 on: November 11, 2022, 05:32:15 PM »
It should be flat. I had that problem with a million dollar table a few years ago that I got for cheap. I fixed it by installing a couple 2x4 ribs under the playfield. I pushed the playfield back up from underneath and attached the ribs to the sidewalls with 90 degree angle brackets.

That's awesome. Did you use a level or anything to make sure it was even and balanced?

Re: Curved playing field on vintage (maybe tournament soccer table)
« Reply #3 on: November 13, 2023, 02:46:11 AM »
I was given this vintage (1970's) table by my neighbor.  After cleaning it up it looks and works great, but I noticed that no matter where you put the ball on the table it wants to roll in towards the center.  I am wondering if the field is supposed to be curved or if it has just sagged over the years.  If I apply some pressure on the bottom of the table in the center, it seems to flatten it out pretty well.  Wondering if this is something i can/should fix, or if this is the way it was designed and we should just play it as is. 
I can't figure out how to attach a photo to this post, but the table I have is the same exact one that is shown in this post https://www.foosball.com/forum/index.php?topic=4789.0geometry dash
https://www.foosball.com/forum/index.php?topic=4789.0
Thanks!
Laszlo
I think you should fix it because it should be flat